Passaic Bergen Water Softening’s InstaSoft™ PL Series softeners bring household water to a new level of quality with the convenience of advanced controls and proven system performance.
The InstaSoft PL Series softeners bring household water to a new level of quality with the convenience of advanced controls and proven system performance. The metered, microprocessor-based controllers, and LCD displays simplify system programming and operation. The InstaSoft PL Series does the rest. Laundry soaps and shampoos clean better than ever. Best of all, your InstaSoft water softener will minimize system salt and water usage.
Start Enjoying the Benefits of Soft Water
The InstaSoft PL Series represents an advanced line of water softeners from Passaic Bergen Water Softening designed to handle the most demanding household needs. Whether the water is from a municipal source or a private well, these water softeners are highly effective in removing unwanted hardness or minerals. Use the PL Series alone or in combination with InstaSoft filters and neutralizers to tackle some of the most challenging water problems.
Count on us for expert assistance in analyzing your water quality and recommending the system best suited to your water conditions and household needs. With a properly configured system, you’ll be sure to enjoy the economies of minimal salt and water usage that the PL Series offers.
Passaic Bergen Water Softening’s InstaSoft PL Series control head electronically meters water consumption and automatically initiates regeneration cycle only when needed. The “brains” of the PL Series adjust to your lifestyle and changing water usage, minimizing system salt and water consumption, while monitoring and recording system performance, including:
This advanced control head also features an easy-to-read LCD display, convenient push-button interface and a manual regeneration mode. If the power fails just reset the clock – all settings and historical data will remain unchanged.
| MODEL | PL-948 | PL-1054 | PL-1248 | PL-1354 | PL-C1035 | |
|---|---|---|---|---|---|---|
| Capacity (Grains/Lbs. NaCl) |
Maximum | 40,000 | 50,000 | 60,000 | 80,000 | 40,000 |
| Medium | 28,400 | 44,400 | 52,700 | 64,200 | 28,400 | |
| Minimum | 23,600 | 35,400 | 40,000 | 53,000 | 23,600 | |
| Amount of Media (cu. ft.) | 1.0 | 1.5 | 2.0 | 2.5 | 1.0 | |
| Maximum Water Hardness (GPG) | 75 | 100 | 100 | 100 | 75 | |
| Maximum Iron (PPM)2 | 6.0 | 7.0 | 8.0 | 9.0 | 6.0 | |
| Minimum pH Required | 6 | 6 | 6 | 6 | 6 | |
| Peak Flow Rate (GPM @ P-PSI)3 | 17.1 @ 15.0 | 17.5 @ 15.0 | 18.0 @ 15.0 | 18.5 @ 15.0 | 17.1 @ 15.0 | |
| Continuous Flow Rate (GPM @ P-PSI) | 5.0 @ 2.8 | 5.0 @ 3.8 | 5.0 @ 3.2 | 5.0 @ 2.4 | 5.0 @ 2.8 | |
| Water Pressure Range (PSI) | 25-110 | 25-110 | 25-110 | 25-110 | 25-110 | |
| Water Temp. (°F) | 33-100 | 33-100 | 33-100 | 33-100 | 33-100 | |
| Electrical Requirements (volts-hertz) | 110-50/60 | 110-50/60 | 110-50/60 | 110-50/60 | 110-50/60 | |
| Pipe Size | 3/4"-1 1/4" | 3/4"-1 1/4" | 3/4"-1 1/4" | 3/4"-1 1/4" | 3/4"-1 1/4" | |
| Total Dimensions | Media Tank | 9"w x 56"h | 10"w x 62"h | 12"w x 56"h | 13"w x 62"h | 13.5"w x 42.5"h |
| Brine Tank | 18"w x 40"h | 18"w x 40"h | 18"w x 40"h | 18"w x 40"h | 18"w x 33"h | |
| Depth | 22.5" | |||||
